JEE Advanced · Physics

Current Electricity PYQs

28 previous-year questions from Current Electricity in JEE Advanced, 2009–2026, latest first.

Q1JEE Advanced · 17 May 2026 · Paper-2
A metal wire of cross-sectional area 0.5 mm2 and length 100 m is connected across a battery of e.m.f. 2 V and internal resistance 1 Ω. The density, atomic mass and electrical conductivity of the metal are 6.35 ××\times 103 kg m−3, 63.5 gm/mole and 2 ××\times 108 mho m−1, respectively. Assuming one conduction electron per atom of the metal, the drift velocity (in mm s−1) of the electrons in the wire is [Take Avogadro's number as 6 ××\times 1023 and charge of the electron as 1.6 ××\times 10−19 C.]
  1. (A)0.052
  2. (B)0.104
  3. (C)0.208
  4. (D)0.156
Show answer & solution

Answer: C

R = L/(σA) = 100/(2 ××\times 108 ××\times 0.5 ××\times 10−6) = 1 Ω ⇒⇒\Rightarrow I = 2/(1 + 1) = 1 A n = ρNA/M = 6.35 ××\times 103 ××\times 6 ××\times 1023/0.0635 = 6 ××\times 1028 m−3 vd = I/(neA) = 1/(6 ××\times 1028 ××\times 1.6 ××\times 10−19 ××\times 0.5 ××\times 10−6) ≈ 2.08 ××\times 10−4 m/s = 0.208 mm/s
Q2JEE Advanced · 17 May 2026 · Paper-2Numerical answer
As shown in the figure, the resistance of a galvanometer G can be found by the half-deflection method. Here the resistance R2 is adjusted such that when the key K is closed the deflection in the galvanometer becomes half of the value as compared to when K is open. Half-deflection is obtained at R2 = 4 Ω and thus the galvanometer resistance is found to be 6 Ω. In this half-deflection condition the current (in mA) through the resistor R1 is figure
Question 2
Show answer & solution

Answer: 694.44

K open: Ig = 10/(R1 + 6); K closed: I = 10/(R1 + 2.4), Ig′ = (4/10)I Ig′ = Ig/2 ⇒⇒\Rightarrow 4/(R1 + 2.4) = 5/(R1 + 6) ⇒⇒\Rightarrow R1 = 12 Ω I = 10/14.4 A ≈ 694.44 mA
Q3JEE Advanced · 28 Aug 2022 · Paper-1One or more correct
The figure shows a circuit having eight resistances of 1 Ω each, labelled R1 to R8, and two ideal batteries with voltages ε1 = 12 V and ε2 = 6 V. figure Which of the following statement(s) is(are) correct?
Question 3
  1. (A)The magnitude of current flowing through R1 is 7.2 A.
  2. (B)The magnitude of current flowing through R2 is 1.2 A.
  3. (C)The magnitude of current flowing through R3 is 4.8 A.
  4. (D)The magnitude of current flowing through R5 is 2.4 A.
Show answer & solution

Answer: A, B, C, D

Take the left vertex as 0 V. By symmetry, R6/R5 and R7/R8 pairs carry equal currents, so the top and bottom vertices are at the same potential V0. Nodal analysis at the top/bottom node (R6 ∥∥\parallel R5: ½ Ω, R2 ∥∥\parallel R4: ½ Ω, R7 ∥∥\parallel R8: ½ Ω) with the centre and right nodes gives V0 = 54/5 V and right vertex V′ = 66/5 V. Currents: IR1 = 36/5 = 7.2 A, IR2 = 6/5 = 1.2 A, IR3 = 24/5 = 4.8 A, IR5 = 12/5 = 2.4 A All four statements are correct.

25 more Current Electricity questions

Practise them free

Practise all 28 Current Electricity PYQs

Untimed with solutions, or as a timed test. Your mistakes are saved so you can retry them.

Start free